Apr 27, 2024  
2018-2019 College Catalog 
    
2018-2019 College Catalog [ARCHIVED CATALOG]

Course Descriptions


SLCC Prefix Key

Following is an alphabetical list of descriptions of courses offered by South Louisiana Community College. Each course is listed alphabetically, by a four-letter prefix and course number, followed by four numbers (x-x-x-x). These four numbers in parentheses indicate lecture hours per week, lab hours per week, equivalent internship/clinical/work experience per week and total credit hours, for a 15 week semester as shown below. If the semester length is reduced the number of hours will be proportionately increased (i.e. In a 12 week semester these hours are increased by a third, in an 8 week semester they will double and in a 4 week semester they will quadrupled). When enrolling, be careful of mixing semester lengths as the hour requirements for courses may overlap each other and not allow you to complete any course. Remember you are required to complete all the instructional activities and meet course class attendance requirements. Work with your advisor if you required enrolling in differing semester lengths to ensure there are no time clashes.

Course Prefix Course Number Course Title Hrs. of Lecture per wk. Hrs. of Lab per wk. Equivalent Hrs. of Internship/ Clinical/Work Experience per wk. * Credit hours
ENGL 1010 Rhet & Comp 3 0 0 3


* The hours that are required for Internship/ Clinical/ Work Experience have been expressed as if they occur each week in a typical 15 week semester. This may not be case and this experience may be full-time over several weeks of the semester. Please work with an Advisor to understand the commitment required to complete such activities and how they will influence your scheduling of other classes.

Classification of Courses; D, UN, UT

  • Those courses labeled with a “D” and numbered 0-0999 are developmental, and credits earned may not be used to satisfy degree requirements.
  • Courses numbered 1000-1999 are freshman-level courses designed primarily for students of this classification.
  • Courses numbered 2000-2999 are sophomore-level courses designed primarily for students of this classification
  • Courses labeled with “UN” are undergraduate courses that are nontransferable credits
  • Courses labeled “UT” are undergraduate transferable credits.

Pre-requisites, Concurrency, Co-requisites

Some courses have pre-requisites, concurrency, or co-requisites listed.

A Prerequisite is an academic requirement that must be satisfied prior to enrolling in a course. A student requesting a course must have completed all pre-requisites listed for that course or must otherwise demonstrate to the instructor and appropriate Divisional Dean that s/he has had the equivalent preparation.

The statement of Concurrency in the course description describes a student’s ability to take a course and its pre-requisites(s) in the same term. A statement of “none” means there is no ability to take the courses pre-requisites at the same time as the required course. In this case you must have must have completed the required pre-requisites in an earlier semester. If course codes appear are listed after the Concurrency requirement it indicates that these pre-requisites can be taken at the same time as the course.

A Co-requisite is an academic requirement that a course must be taken together with another course(s) in the same semester. This requires that a student must enroll in theses co-requisite courses in addition to the required course. Failure to do so will not allow you to enroll. A student who believes they have satisfied the pre requisite requirements must demonstrate this to the appropriate Divisional Dean that s/he has either had the prior or equivalent preparation or is currently satisfying the requirement. Descriptions of courses should be read in order to determine if there are required pre-requisites or co-requisites that must be satisfied.

Course Description and Louisiana Board of Regents Common Course Matrix equivalency
A short description of the course content will be made in the paragraphs below the course title. If the course has equivalency in the common course matrix of the Louisiana Board of Regents, the equivalent code will be stated along with the short course description.

 
  
  • MATH 1110 Trigonometry

    (3-0-0) 3 Credits UT
    Trigonometric functions and graphs; inverse trigonometric functions; fundamental identities and angle formulas; solving equations; triangles with applications; polar coordinate system. Equivalent to CMAT 1223, Trigonometry, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): ACT mathematics score of 25 or higher, or MATH 1105   Concurrency: None Co-requisite(s): None.
  
  • MATH 2007 Measurement and Geometry for Elementary Teachers

    (3-0-0) 3 Credits UT
    The study of applications of measurement and geometry with a focus on understanding and explaining the mathematical concepts. Topics include systems of measurement, plane figures, properties of polygons, three-dimensional figures, area and perimeter, volume and surface area, geometric patterns, estimation, problem solving and number concepts integrated within real-world situations. This course cannot be used to fulfill the General Education Math requirement.
    Pre-requisite(s): C or better in MATH 1105  Concurrency: None Co-requisite(s): None.
  
  • MATH 2010 Applied Calculus

    (3-0-0) 3 Credits UT
    Introduction to differential and integral calculus with an emphasis on applications, designed primarily for business, economics, and social sciences. Topics include limits, the first and second derivative, the first and second derivative tests for relative extrema; exponential and logarithmic functions; the definite and indefinite integral; and the Fundamental Theorem of Calculus. Calculus will be used to solve real world applications. (This course is not equivalent to Calculus I and does not serve as a prerequisite for Calculus II.) Equivalent to CMAT 2103, Applied Calculus, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): C or better in MATH 1105  Concurrency: None Co-requisite(s): None
  
  • MATH 2020 Introductory Statistics

    (3-0-0) 3 Credits UT
    Descriptive statistics; probability; discrete and continuous (including binomial, normal and T) distributions; sampling distributions; interval estimation; hypothesis testing; linear regression and correlation. A graphing calculator is required. Equivalent to CMAT 1303, Introductory Statistics, Louisiana Board of Regents Common Course Matrix. MATH 2020 Master Syllabus  
    Pre-requisite(s): C or better in MATH 1105 ; Concurrency: None Co-requisite(s): None
  
  • MATH 2040 Finite Mathematics

    (3-0-0) 3 Credits UT
    Systems of linear equations, matrices, and matrix algebra; linear inequalities; counting techniques: permutations and combinations; probability; basic concepts in financial mathematics (annuities included); and an introduction to statistics. A graphing calculator is required. Equivalent to CMAT 1313, Finite Mathematics, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): C or better in MATH 1105  Concurrency: None Co-requisite(s): None.
  
  • MATH 2100 Technical Mathematics

    (3-0-0) 3 Credits UT
    A study of mathematical concepts needed in applied technical fields. Emphasis is on problem solving and applications of measurement, percent, geometry, variation, logarithms, and trigonometry. A graphing calculator is required.
    Pre-requisite(s): C or better in MATH 1105  Concurrency: None Co-requisite(s): None.
  
  • MATH 2210 Calculus I

    (4-0-0) 4 Credits UT
    Limits and continuity of functions; introduction of derivative; techniques of differentiation; chain rule; implicit differentiation; differentiation of transcendental and inverse functions; applications of differentiation: concavity; relative extrema; maximum and minimum values of a function; optimization; anti-differentiation; definite integrals; Fundamental Theorem of Calculus; areas; applications of definite integrals; work and volume. (Credit/placement exam may be required if transferring a course with fewer credits than the receiving institution.) Equivalent to CMAT 2114, Calculus I, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): C or better in MATH 1105  and C or better in MATH 1110 , an ACT score of 28 or higher, or transfer credit in equivalent course Concurrency: None Co-requisite(s): None
  
  • MATH 2211 Calculus II

    (4-0-0) 4 Credits UT
    Techniques of integration; applications of the integral; parametric equations, polar coordinates, sequences and infinite series., Equivalent to CMAT 2124, Calculus II, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): MATH 2210  with a grade of C or better Concurrency: None Co-requisite(s): None.
  
  • MCIS 1005 Microcomputer Applications

    (3-0-0) 3 Credits UT
    Provides a working knowledge of the four core components of Microsoft Office, Word (word processing), PowerPoint (presentation), Excel (spreadsheet analysis), and Access (database management), including screen navigation of program menus, creating and editing documents, creating presentations, worksheets, forms, graphics, and reports. Empathizes how applications may be applied to classroom and educational environments.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • MCIS 1010 Word Processing

    (3-0-0) 3 Credits UT
    Practical hands on application of computer word processing skills and concepts using Microsoft Word for Windows with some comparisons and exposure to WordPerfect, particularly producing and formatting letters, manuscripts, outlines, tables, and importing graphics. This course is designed to be adjustable to the student’s entry skill level.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • MCIS 1030 Spreadsheets

    (3-0-0) 3 Credits UT
    Introduction to commonly used features and functions of current Microsoft Excel software. Topics covered include worksheet setup, HELP facility, commands and formulas, printing, charting & graphing, worksheet linking, and wizards, the various data analysis tools included in Excel (such as queries, pivot tables, scenarios, and data maps); importing and exporting data; creating customized templates; and the design, creation, and use of macros.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • MTTC 1115 Introduction to Machine Tools

    (1-8-0) 5 Credits UN
    Identify types and uses of blueprints, identifying lines, and interpreting views, dimensions and tolerances. Use layout tools, precision measuring tools, applied shop math, hand tools, grinders and grinding wheels.
    Pre-requisite(s): None Concurrency: MTTC 1204 , MTTC 1305   Co-requisite(s): None
  
  • MTTC 1204 Bench Work and Precision Grinding

    (1-6-0) 4 Credits UN
    Develop techniques of manufacturing mechanical parts using layout tools, precision measuring tools, and various types of measuring instruments. Identify types of grinders and accessories. Perform set-up operations, wheel dressing and maintenance, proper uses of surface grinders and tool grinders, and perform precision grinding operations.
    Pre-requisite(s): None Concurrency: MTTC 1115  , MTTC 1305   Co-requisite(s): None
  
  • MTTC 1305 Drill Press

    (1-8-0) 5 Credits UN
    Identify types and uses of drill presses, parts, and controls. Manufacture mechanical parts using drilling, boring, and tapping operations.
    Pre-requisite(s): None Concurrency: MTTC 1115 MTTC 1204   Co-requisite(s): None
  
  • MTTC 2105 Basic Lathe I

    (2-6-0) 5 Credits UN
    Identify types of lathes, accessories, parts, and controls. Calculate proper feeds and speeds. Learn facing, drilling, reaming, and boring operations. Sharpen cutting tools. Manufacture mechanical parts using turning, facing, drilling, reaming, and boring operations.
    Pre-requisite(s): MTTC 1115  , MTTC 1204 , MTTC 1305   Concurrency: MTTC 2203 , MTTC 2204   Co-requisite(s): None
  
  • MTTC 2203 Computer Numerical Control (CNC) I

    (0-6-0) 3 Credits UN
    Identify coding used in CNC technology. Write CNC programs. Install programs in CNC machines. Manufacture parts using CNC technology.
    Pre-requisite(s): MTTC 1115 , MTTC 1204 , MTTC 1305   Concurrency: MTTC 2105 , MTTC 2204   Co-requisite(s): None
  
  • MTTC 2204 Basic Lathe II

    (0-8-0) 4 Credits UN
    Learn proper feeds and speeds for knurling, boring, taper-turning, and thread cutting. Learn how to use steady rest, follow rest and taper attachment. Manufacture mechanical parts using boring and counter boring operations, steady-rest, follow rest setups, filing and polishing, knurling and thread forming operations. Learn the use of indexable carbide tooling.
    Pre-requisite(s): MTTC 1115 , MTTC 1204 , MTTC 1305   Concurrency: MTTC 2105 , MTTC 2203   Co-requisite(s): None
  
  • MTTC 2304 Advanced Lathe

    (0-8-0) 4 Credits UN
    Perform precision cutting of tapers, advanced threading operations, multi-lead threading, and other advanced cutting operations.
    Pre-requisite(s): MTTC 1115 , MTTC 1204 , MTTC 1305   Concurrency: MTTC 2105 , MTTC 2203 , MTTC 2204   Co-requisite(s): None
  
  • MTTC 2404 Basic Mill

    (0-8-0) 4 Credits UN
    Identify types of milling machines, accessories, parts, and controls. Learning to mill to length, squaring part, milling set-ups, associated cutting tool, and calculate proper feeds and speeds. Learn to realign a vertical milling head. Square up milling vise. Manufacture 3-D parts using a milling process. Manufacture mechanical parts that include key-seats, and gang-milling procedures. Learn indexing procedures using rotary table and dividing heads.
    Pre-requisite(s): MTTC 2105 , MTTC 2204  Concurrency: MTTC 2504 , MTTC 2604   Co-requisite(s): None
  
  • MTTC 2504 Advanced Mill

    (0-8-0) 4 Credits UN
    Perform multi-angular set-ups, gear cutting, advanced indexing operations and other advanced cutting operations.
    Pre-requisite(s): MTTC 2105 , MTTC 2204  Concurrency: MTTC 2404 , MTTC 2604   Co-requisite(s): None
  
  • MTTC 2604 Computer Numerical Control (CNC) II

    (0-8-0) 4 Credits UN
    Identify coding used in CNC technology. Write CNC programs. Install programs in CNC machines. Manufacture parts using CNC technology.
    Pre-requisite(s): MTTC 2203  Concurrency: MTTC 2404 , MTTC 2504   Co-requisite(s): None
  
  • MUSC 1010 Music Appreciation

    (3-0-0) 3 Credits UT
    Music 1010 is a nontechnical course open to all interested persons, designed to increase the response to music through a knowledge of the art and development of perceptive listening skills and study of various styles and principles from non-Western, Western European, and American music, Renaissance to the late 20th Century. This course is summarized as basic elements and vocabulary of music; appreciation and understanding of diverse styles of music past and present; developing listening skills. Includes opportunities for experiencing music (recorded and/or live). Equivalent to CMUS 1013, Music Appreciation, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • MUSC 1012 Fundamentals of Music

    (3-0-0) 3 Credits UT
    An introduction to music theory and the elements of music, including a study of the staff, clefs, key signatures, scales, time signatures, notation, rhythm and meter, major and minor chords, intervals, introduction to the keyboard, rhythmic, melodic, and harmonic ear training. Previous musical knowledge is not a requirement.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • MUSC 1020 History of Rock

    (3-0-0) 3 Credits UT
    A general survey of songwriters and performers through the significant styles of contemporary rock music in the Twentieth Century.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • MUSC 2101 Fundamentals of Pro Tools

    (3-0-0) 3 Credits UT
    This course introduces students to the operation of the Digidesign Pro Tools system. It is a software and hardware based course incorporating music and film theory. This course cannot be used to fulfill the general education arts requirement.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • MUSC 2201 Intermediate Pro Tools

    (3-0-0) 3 Credits UT
    This course provides students with intermediate operating principles and techniques in the Digidesign Pro Tools LE and TDM environments. It is a software and hardware based course incorporating music and film theory. This course cannot be used to fulfill the general education arts requirement.
    Pre-requisite(s): MUSC 2101   Concurrency: None Co-requisite(s): None
  
  • MUSC 2300 History of Jazz

    (3-0-0) 3 Credits UT
    MUSC 2300 is a non-technical course open to all interested persons. Course designed to increase the response to music through a knowledge of the art and development of perceptive listening skills and the study of various styles and principles of Jazz music. The course is summarized as basic elements and vocabulary of jazz; appreciation and understanding of diverse styles of jazz, past and present. Includes opportunities for experiencing jazz (recorded and/or live). Equivalent to CMUS 1023, Jazz Appreciation, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • MUSC 2310 Acadian Music and Culture

    (3-0-0) 3 Credits UT
     Acadian Music and Culture is a non-technical course open to all interested persons, designed to increase the response of music through a knowledge of the art and development of perceptive listening skills and study of various principles from Western European, Canadian, and America Music, from its origins to present day.  This course is summarized as: basic elements and vocabulary of music, appreciation and understanind of diverse styles of Acadian, Zydeco, and Swamp Pop music, past and present, developing listening skills. Includes opportunities for experiencing usic (recorded and live). 
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • NDTT 1100 Liquid Penetrant Testing

    (2-4-0) 4 Credits UN
    This course covers the fundamental principles of locating surface defects using the Liquid Penetrant Inspection.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • NDTT 1120 Magnetic Particle Testing

    (2-4-0) 4 Credits UN
    This course covers the fundamental principles of locating surface and subsurface defects using the Magnetic Particle Inspection.
    Pre-requisite(s): None Concurrency: NDTT 1100   Co-requisite(s): None
  
  • NDTT 1160 Visual Testing

    (1-2-0) 2 Credits UN
    This course is the basic foundation for visual testing of materials used in manufacture of different products. The purpose of this course is to provide key fundamental knowledge and understanding of basic visual techniques while working to procedures and industry codes and standards.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • NDTT 1180 NDT Technical Report Writing

    (1-2-0) 2 Credits UN
    This course covers the type of report formats used by the Nondestructive Testing Industry.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • NDTT 1200 NDT Blueprint Reading & Sketching

    (2-4-0) 4 Credits UN
    An application of basic blueprint reading and weld symbol interpretation and covering the application of basic drafting skills needed by an NDT technician such as lettering, measuring, isometric drawings and pipe system drawings.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • NDTT 1240 Ultrasonic Testing I

    (2-4-0) 4 Credits UN
    This course is the basic foundation for ultrasonic testing of ferrous and non-ferrous materials. The purpose of this course is to provide key fundamental knowledge and understanding of basic ultrasonic techniques while working to procedures and industry codes and standards.
    Pre-requisite(s): NDTT 1120   Concurrency: NDTT 1260  Co-requisite(s): None
  
  • NDTT 1260 Ultrasonic Testing II

    (2-4-0) 4 Credits UN
    The course is an advanced understanding of ultrasonic testing of ferrous and non-ferrous materials. The purpose of this course is to provide key fundamental knowledge and understanding of advance Ultrasonic techniques while working to procedures and industry codes and standards.
    Pre-requisite(s): None Concurrency: NDTT 1240  Co-requisite(s): None
  
  • NDTT 1300 Radiation Safety

    (2-4-0) 4 Credits UN
    The purpose of this course is to help train the student to work safely as a qualified gamma radiographer. This training is important to help the student work competently as a radiographer and to help prevent a radiography accident. This class will be taught in accordance LAC 33:XV.599, Appendices A and B.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • NDTT 1320 Radiography Testing I

    (2-4-0) 4 Credits UN
    This course allows students to test articles according to the codes and procedures used by various industries in the radiography testing field. This course is also designed to introduce the students to the safety and use of equipment used in radiography testing to locate subsurface defects.
    Pre-requisite(s):  NDTT 1300   Concurrency: NDTT 1360   Co-requisite(s): None
  
  • NDTT 1360 Radiography Testing II

    (2-4-0) 4 Credits UN
    This course is designed to cover the more advanced applications of finding subsurface defects.
    Pre-requisite(s): None Concurrency: NDTT 1320   Co-requisite(s): None
  
  • NDTT 1440 Manufacturing Processes

    (1-2-0) 2 Credits UN
    This course is an introduction to the many facets of industry which involves need for nondestructive evaluations of material, control of properties, effects of processing problems in welding and assembly, finishing and protection and serviceability of engineering materials.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • NDTT 1460 Working in the NDT Industry

    (2-4-0) 4 Credits UN
    This course is designed to give the student practical application of combined coursework in the field of nondestructive testing.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • NDTT 2001 Nondestructive Testing Capstone

    (1-0-0) 1 Credits UN
    This Capstone class is designed to demonstrate accumulated training in Nondestructive Testing in a single original project. This project could be a portfolio of thing you have done and accomplish in the Nondestructive Testing program.
  
  • NURS 1100 Fundamentals of Nursing

    (4-6-6) 6 Credits UT
    The course introduces fundamental concepts of nursing practice, such as patient needs, safety, basic physical assessment, communication, teaching/learning, critical thinking, ethical-legal, and nursing process. The role of the nurse as a member of the health care team is emphasized. Additionally, psychomotor skills needed to assist individuals in meeting basic human needs, maintaining microbial, physical and psychological safety are introduced along with skills needed in therapeutic interventions. Correlation of course content and patient care will be provided in clinical settings.
    Pre-requisite(s): MATH 1105 , ENGL 1010 , BIOL 2022 /BIOL 2023 , PSYC 2010   Concurrency: None Co-requisite(s): None
  
  • NURS 2100 Adult Health Nursing I

    (4-6-0) 6 Credits UT
    The course introduces the study of adult medical surgical care of patients with the commonly diagnosed conditions. Included with the conditions is the importance of providing patient centered care, therapeutic communication, supporting teamwork, and providing for patient safety. The significance of evidence-based practice, cultural diversity and quality improvement is also integrated to promote positive patient outcomes. Correlation course content and patient care will be provided in hospital medical-surgical units in the community.
    Pre-requisite(s): NURS 1100 , BIOL 2032 /BIOL 2033 , PSYC 2080 , ENGL 1020   Concurrency: None Co-requisite(s): None
  
  • NURS 2120 Mental Health Nursing

    (3-0-3) 4 Credits UT


    The course focuses on patients experiencing mental health problems. The principal focus of the course is on the utilization of the nursing process with patients in mental health settings. Emphasis is given to the use of techniques of communication which are appropriate for one to one psychotherapeutic nurse-patient relationships. The concepts of basic human needs, developmental process along with patient safety are included. Correlation of course content and patient care will be provided in mental health units in both inpatient and outpatient settings.
    Pre-requisite(s): NURS 1100 , BIOL 2032 /BIOL 2033 , PSYC 2080 , ENGL 1020  with grades of “C” or better

      Concurrency: None Co-requisite(s): None

  
  • NURS 2200 Adult Health Nursing II

    (3-9-9) 6 Credits UT
    The course continues the study of adult medical surgical care of patients with selected health conditions. Included with the conditions is the importance of providing patient centered care, therapeutic communication, supporting teamwork, and providing for patient safety. The significance of evidence-based practice, cultural diversity and quality improvement is also integrated to promote positive patient outcomes. Correlation of course content and patient care will be provided in hospital medical-surgical units in the community.
    Pre-requisite(s): NURS 2100 , NURS 2120 , BIOL 2100  with grades of “C” or better Concurrency: None Co-requisite(s): None
  
  • NURS 2220 Maternal Child Nursing

    (4-9-9) 7 Credits UT
    The course focuses on the nursing care of the child bearing women and her family. Emphasis is placed on the role and practice of the nurse in assisting the patient and family to adapt to alterations and stressors associated with antepartal, intrapartal, postpartal and neonatal periods. Correlation course content and patient care will be provided in hospital OB, postpartal and newborn nursery units in the community. The other portion of the course will introduce the nursing care of the well child, the child with special needs and the child with acute and chronic health care needs. Emphasis is on promoting healthy growth and development, even during illness. Students will also examine the role of the family and the importance of it to the care of the child. Clinicals will focus on both well children and children with health care needs.
    Pre-requisite(s): NURS 2100 , NURS 2120 , BIOL 2100  Concurrency: None Co-requisite(s): NURS 2200  
  
  • NURS 2300 Adult Health Nursing III

    (4-12-12) 8 Credits UT
    The course focuses on nursing care of adult patients experiencing life-threatening or complex health conditions. It also emphasizes management of the health care environment and the role of the professional nurse. Included with the conditions is the importance of providing patient-centered care, therapeutic communication, supporting teamwork, and providing for patient safety. The significance of evidence-based practice, cultural diversity and quality improvement is also integrated to promote positive patient outcomes. Correlation of course content and patient care will be provided in hospital medical-surgical units in the community.
    Pre-requisite(s): NURS 2200 , NURS 2220  with grades of “C” or better Concurrency: None Co-requisite(s): None
  
  • OGPT 1020 Gas Regulations

    (2-0-0) 2 Credits UN
    Topics covered include fundamental law concepts, federal, state and local rules and regulations regarding human, health and the environment as it relates to the energy sector: air and water quality; environmental safety; roles of federal, state and local regulatory agencies; regulatory compliance and enforcement related to the energy sector. Safety and Environmental Management Analysis. This course will lead to Safe Gulf / Safe Land Certification.
    Pre-requisite(s): None Concurrency: OGPT 1030 , OGPT 1100 , OGPT 1110 , OGPT 1300   Co-requisite(s): None
  
  • OGPT 1030 Occupational Health and Safety

    (3-0-0) 3 Credits UN
    This course is an overview industrial safety geared towards the oil and gas industry. Proper method and procedure for conduction safe operations will be described. Topics including accident prevention and investigation, material handling, hazard communication, intervention / Stop Work Authority, Job Safety Analysis, Personal Protection Equipment, Fire Prevention and Portable Extinguishers.  Other topics will include safety inspection audits, record keeping, incident reporting and investigation, site specific hazards and emergency evacuation, job safety and environmental analysis.  This course will lead to SafeGulf / SafeLand Certification.
    Pre-requisite(s): None  Concurrency: OGPT 1020 , OGPT 1100 OGPT 1110 OGPT 1300   Co-requisite(s): None
  
  • OGPT 1100 Introduction to Oil and Gas Exploration and Production

    (3-0-0) 3 Credits UN
    This course is an introduction to various aspects of the oil and gas industry, including equipment, systems, instrumentation, operations, and related scientific principles. The origins of oil and gas, exploration, leasing, drilling, testing and completing wells, stimulating reservoirs, reservoir production, lifting, recovering and separation is also covered.
    Pre-requisite(s): None Concurrency: OGPT 1030 , OGPT 1020 , OGPT 1110 , OGPT 1300   Co-requisite(s): None
  
  • OGPT 1110 Drilling Process

    (3-0-0) 3 Credits UN
    This course is an introductory course covering petroleum drilling systems, including fundamental oil well drilling concepts, quantities and unit systems, drilling rig components, drilling fluids. Pressure loss calculations, casing, well cementing, directional drilling, completion and abandonment.
    Pre-requisite(s): None Concurrency: OGPT 1020 , OGPT 1030 , OGPT 1100 , OGPT 1300   Co-requisite(s): None
  
  • OGPT 1120 Offshore Drilling Process

    (3-0-0) 3 Credits UN
    This course provides an overview of offshore oil field development concepts and explains how the offshore structures and facilities function as integrated systems. The content includes the full range water depths from shallow water to ultra-deep water. All major components required for offshore developments such as fixed and floating platform, drilling and workover rigs, pipelines, risers, process and utilities and construction equipment will be discussed.
    Pre-requisite(s): OGPT 1030 , OGPT 1100 , OGPT 1110   Concurrency: OGPT 1130 OGPT 1500 , OGPT 2100   Co-requisite(s): None
  
  • OGPT 1130 Well Completions and Workovers

    (3-0-0) 3 Credits UN
    This course will provide students with a thorough understanding of the impacts of the various reservoir and production conditions on well completion and various well designs, the various types if subsurface completion, production and control equipment and their function and selection criteria, tubing design, and selection, and completion and workover fluids. Additional topics to be covered will include completion and workover operations such as perforating, remedial cementing, sand control and matrix stimulation. An overview of production logging techniques and interpretation for identification of well problems will also be covered during this course.
    Pre-requisite(s): OGPT 1030 , OGPT 1100 , OGPT 1110   Concurrency: OGPT 1120 OGPT 1500 , OGPT 2100   Co-requisite(s): None
  
  • OGPT 1300 Industrial Electricity

    (2-3-0) 3 Credits UN
    This course introduces the basic concepts of electricity, electrical components and equipment, and their application in the industrial environment. Topics of study include proper use of test equipment. Alternating and direct current, units of electricity, Ohm’s Law, Kirchhoff’s Laws, power, resistance, series p parallel circuits, electrical math and the use of formulas, and the use of test equipment to measure continuity, voltage, and current values and the use of safety practices.
    Pre-requisite(s): None Concurrency: OGPT 1020 , OGPT 1030 , OGPT 1100 , OGPT 1110   Co-requisite(s): None
  
  • OGPT 1400 Oil and Gas Instrumentation

    (3-3-0) 4 Credits UN
    This course is a study of instruments, instrumentation systems, terminology, process variables and control loops as used in the oil and gas environment. Measurement and transducer type signal conditioning, recording and analysis are also covered.
    Pre-requisite(s): OGPT 1030 , OGPT 1300   Concurrency: OGPT 1120 , OGPT 1130 , OGPT 1500 , OGPT 2100   Co-requisite(s): None
  
  • OGPT 1500 Hydraulics and Pneumatics

    (2-3-0) 3 Credits UN
    This course is designed to provide students with an introduction to the fundamentals of hydraulic and pneumatic, components of each system, and the operations, maintenance, and analysis of each system.
    Pre-requisite(s): OGPT 1030 , OGPT 1300   Concurrency: OGPT 1120 , OGPT 1130 OGPT 2100   Co-requisite(s): None
  
  • OGPT 2020 Well Control and Blow Out Prevention

    (3-0-0) 3 Credits UN
    In this course students will learn about causes of kicks, kick warning signs, pressure concepts and calculations, well control, shut in, and well killing procedures. Crew positions and duties, well control equipment including specification, installation and maintenance will be discussed.
    Pre-requisite(s): OGPT 1120  Concurrency: OGPT 2030 , OGPT 2200   Co-requisite(s): None
  
  • OGPT 2030 Natural Gas Processing

    (2-3-0) 3 Credits UN
    This course is an overview of the physical, chemical, and technical principles used to understand the processing of natural gas and its by-products. Topics will include physical properties, phase equilibria and vapor liquid equilibrium calculations, water-hydrocarbon systems and natural gas dehydration, natural gas gathering and plant inlet separation, sour natural gas treating / sweetening, dew point control and NGL liquid recovery, acid gas compression and injection, sulfur recovery.
    Concurrency: OGPT 2020 , OGPT 2200   Co-requisite(s): None
  
  • OGPT 2040 Oil and Gas Pump Technology

    (3-0-0) 3 Credits UN
    This course is designed to cover the artificial lift created by positive displacement pumps and centrifugal pumps used in the recovery of oil and gas. The type of pumps covered will include beam, screw and piston, check ball, and end suction centrifugal pumps.
    Pre-requisite(s): None Concurrency: OGPT 2020 , OGPT 2030 , OGPT 2200   Co-requisite(s): None
  
  • OGPT 2050 Pumps and Compressors

    (2-2-0) 3 Credits UN
    A study of the theory and operations of the various types of pumps and compressors. Topic include mechanical power transmission systems including gears, v-belts and chain drives.
    Pre-requisite(s): None Concurrency: OGPT 2020 , OGPT 2030 , OGPT 2200   Co-requisite(s): None
  
  • OGPT 2060 Drilling Fluids

    (3-0-0) 3 Credits UN
    This course will provide the students with a comprehensive understanding of the drilling fluids characteristics. Topics will include the nature and the control of drilling fluids as applied to drilling practices.
    Pre-requisite(s): OGPT 1120 , OGPT 1130   Concurrency: OGPT 2020 , OGPT 2030 , OGPT 2200   Co-requisite(s): None
  
  • OGPT 2100 Basic Production Operation

    (2-3-0) 3 Credits UN
    The course focuses on the basics of oil and gas production operations. Primary emphasis is on the fundamentals of separation and the basic configuration and operation of both vertical and horizontal separators and inclusive of emulsion treatment vessels. Students will be taught these skills in a classroom and practical setting and will also be able to experience the virtual oil platform.
    Pre-requisite(s): OGPT 1030 , OGPT 1100   Concurrency: OGPT 1120 , OGPT 1130 OGPT 1500   Co-requisite(s): None
  
  • OGPT 2110 Petroleum Processing

    (3-0-0) 3 Credits UN
    This course will present an overview of the modern, integrated petroleum refinery and the processes employed to convert crude oil and intermediate streams into finish products. This course provides major insights into both primary and secondary processes such as atmospheric distillation, vacuum distillation, cracking, hydrocracking, catalytic reforming, processes for LOBS, coking, and visbreaking.
    Pre-requisite(s): OGPT 2100   Concurrency: OGPT 2020 , OGPT 2030 , OGPT 2200   Co-requisite(s): None
  
  • OGPT 2200 Production and Safety Systems

    (2-3-0) 3 Credits UN
    This course provides inexperienced and experienced students with the recommended practices and guidelines to perform safely while working with production safety systems found in the oil and gas industry. Students will be given the knowledge and taught these skills in a classroom and practical setting. Students should be able to demonstrate these necessary skills during practical examination and demonstrate knowledge during written examination.
    Pre-requisite(s): OGPT 2100  Concurrency: OGPT 2020 , OGPT 2300   Co-requisite(s): None
  
  • OGPT 2300 Internship–Oil and Gas Production

    (0-0-9) 3 Credits UN
    The internship course will be the final course taken by students in their last semester. An internship experience provides the student with an opportunity to explore career interests while applying knowledge and skills learned in the classroom in a work setting. The experience also helps students gain a clearer sense of what they still need to learn and provides an opportunity to build professional networks.
    Pre-requisite(s): OGPT 1120 , OGPT 1130 OGPT 1500 , OGPT 2100   Concurrency: OGPT 2020 , OGPT 2030 , OGPT 2200   Co-requisite(s): None
  
  • PHSC 1000 Physical Science I

    (3-0-0) 3 Credits UT
    An introduction to the concepts and principles of physical science for non-science majors. Course includes the study of scientific method, motion, thermodynamics, the solar system and other key topics in astronomy. Survey of concepts in physics and physical sciences. (Equivalent to CPHY 1023, Physical Science I, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): Eligibility for MATH 1105   Concurrency: None Co-requisite(s): None
  
  • PHSC 1200 Physical Science II

    (3-0-0) 3 Credits UT
    Additional concepts in physical sciences, which may include physics, chemistry, geology, astronomy, oceanography, etc. Equivalent to CPHY 1033, Physical Science II, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): PHSC 1000   Concurrency: None Co-requisite(s): None
  
  • PHYS 1060 Introduction to Astronomy I

    (3-0-0) 3 Credits UT
    An introductory course focusing on the solar system. No physics background required. Introduction to the astronomy of the solar system. Equivalent to CAST 1103, Astronomy/The Solar System, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): MATH 1105   Concurrency: None Co-requisite(s): None
  
  • PHYS 2070 Introduction to Physics I

    (3-0-0) 3 Credits UT
    Algebra/Trigonometry-based physics: vectors, kinematics, Newton’s Laws, momentum, work and energy, rotations, oscillations and waves, elasticity and equilibrium, thermodynamics. This course is not intended for engineering majors. (Equivalent to CPHY 2113, Physics I (Algebra/Trigonometry Based), Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): MATH 1110   Concurrency: None Co-requisite(s): None
  
  • PHYS 2071 Introduction to Physics I Laboratory

    (0-2-0) 1 Credits UT
    Experiments in mechanics to accompany Algebra/Trigonometry-based physics. Not intended for engineering majors. Equivalent to CPHY 2111, Physics I Lab (Algebra/Trigonometry Based), Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: PHYS 2070   Co-requisite(s): None
  
  • PHYS 2080 Introduction to Physics II

    (3-0-0) 3 Credits UT
    Electrostatics, circuits, magnetism, induction optics, and modern physics (not intended for engineering majors). Equivalent to CPHY 2123, Physics II (Algebra/Trigonometry Based),Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): PHYS 2070  Concurrency: None Co-requisite(s): None
  
  • PHYS 2081 Introduction to Physics II Laboratory II

    (0-2-0) 1 Credits UT
    Selected laboratory experiments designed to supplement the material in PHYS 2080 . Experiments illustrating principles in electricity, magnetism, and light to accompany Algebra/Trigonometry based physics (not intended for engineering majors). Equivalent to CPHY 2121, Physics II Lab (Algebra/Trigonometry Based), Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: PHYS 2080   Co-requisite(s): None
  
  • POLI 1020 Introduction to Foreign Governments

    (3-0-0) 3 Credits UT
    A survey of selected political systems; including its culture and foundations of policy making from among the Western Democracies, Communists (and the former Eastern Bloc) nations and the Middle East.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • POLI 1100 American National Government

    (3-0-0) 3 Credits UT
    A survey of the principles, structure and function of the national government of the United States.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • PSYC 2010 Introduction to Psychology I

    (3-0-0) 3 Credits UT
    This course provides an overview of the scientific study of behavior, including such topics as learning, memory, stress, personality, mental disorders, therapies, and social behavior. It emphasizes the understanding and application of psychological principles. While individual introspection and reflection on the course material is expected, the classroom climate will also be very interactive. Equivalent to CPSY 2013, Introduction to Psychology, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None.
  
  • PSYC 2011 Introduction to Psychology II

    (3-0-0) 3 Credits UT
    This course is designed to expose the student to the scientific bases of behavior with a particular emphasis on physiological aspects of behavior and cognition. Other topics to be covered include psychology as a profession, consciousness, emotion, motivation and learning.
    Pre-requisite(s): PSYC 2010   Concurrency: None Co-requisite(s): None.
  
  • PSYC 2020 Educational Psychology

    (3-0-0) 3 Credits UT
    This course reviews the psychological principles related to learning and motivation. This course provides an overview of the basic principles of Psychology as they relate to education and provides each student with the knowledge and skill to develop strategies to utilize in their teaching. It begins with an overview of the teacher as problem solver approach and then covers information related to student development (physical, cognitive, and social) and characteristics. The latter part of the course focuses on issues and applications related to instruction, motivation, management, and assessment. The assignments, interactive classroom activities, and assessments reflect the course goals of cultural enrichment, lifelong learning, and life skills.
    Pre-requisite(s): PSYC 2010   Concurrency: None Co-requisite(s): None
  
  • PSYC 2030 Child Psychology

    (3-0-0) 3 Credits UT
    This course analyzes behavior and development from conception to adolescence (0 - 12 years) and seeks to provide each student with an increased awareness as to current knowledge of child development and behavior. Students will become familiar with the physical changes, cognitive development, and social and emotional issues occurring during childhood. Equivalent to CPSY 2313, Child Psychology, [Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): PSYC 2010   Concurrency: None Co-requisite(s): None.
  
  • PSYC 2040 Adolescent Psychology

    (3-0-0) 3 Credits UT
    This course examines the developmental period between childhood and adulthood known as adolescence. It emphasizes the understanding and application of biological, cognitive, and socio-emotional changes occurring during this time period. The classroom climate includes lectures and interactive discussion of topics such as identity development, sexuality, moral development, and gender. Students will gain an in-depth knowledge of typical adolescent development as well as problems in adolescence and emerging adulthood. Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): PSYC 2010   Concurrency: None Co-requisite(s): None.
  
  • PSYC 2050 Psychology of Adjustment

    (3-0-0) 3 Credits UT
    This course provides a review of coping behaviors and wellness with particular emphasis on adaptation responses in regard to stress, frustration, sex, and interpersonal skills. Students will gain a better understanding of interpersonal relationships and be able to apply principles of Psychology to their personal and social lives. The intent is to improve both physical and mental health of students and their direct relatives through understanding of relationships between cognitive, physical, and emotional development in the modern world.
    Pre-requisite(s): PSYC 2010   Concurrency: None Co-requisite(s): None
  
  • PSYC 2060 Guiding and Managing Child Behavior

    (3-0-0) 3 Credits UT
    Examination of learning principles and theory relevant to the guidance of children. Guidance, management, discipline techniques are explored in relation to managing difficult children, rewards, behavior modification, social learning and problem solving, and personal responsibility. Practical application through direct participation in an early childhood setting.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • PSYC 2070 Social Psychology

    (3-0-0) 3 Credits UT
    This course considers the impact of social factors, such as relationships, cultural forces, group processes, and attitude on the study of behavior. The course examines the varied ways in which individuals think, feel, and behave toward others and how individuals’ thoughts, feelings, and behaviors are affected by others. Each individual student will be challenged to discover the significance of this knowledge within the context of current events and his/her own personal life. The assignments, interactive classroom activities, and assessments reflect the course goals of cultural enrichment. Equivalent to CPSY 2413, Social Psychology Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): PSYC 2010   Concurrency: None Co-requisite(s): None.
  
  • PSYC 2080 Developmental Psychology

    (3-0-0) 3 Credits UT
    This course investigates human development from conception through old age, each phase of the lifespan is explored, highlighting the biological, cognitive, and socio-emotional aspects of development. This course will also explore theories in human development, developmental research methods, and the dying/grief process. Equivalent to CPSY 2113, Developmental Psychology, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): PSYC 2010   Concurrency: None Co-requisite(s): None.
  
  • PSYC 2090 Death and Dying.

    (3-0-0) 3 Credits UT
    This survey course offers a broad overview of the psychological aspects of death and dying in our society. Topics include attitudes toward and preparation for death; the understanding of and care for terminally ill patients; funeral rituals; burial, mourning and grief practices; grief counseling; suicide and euthanasia. Readings and classroom activities will be supplemented by students’ self-exploration and writing on feelings, attitudes and beliefs about death.
    Pre-requisite(s): PSYC 2010   Concurrency: None Co-requisite(s): None
  
  • SAFE 1003 General Craft Safety

    (3-0-0) 3 Credits UN
    Using the National Center for Construction Education and Research (NCCER) Core Curriculum student guide, this course will provide instruction and hands-on experience in basic safety practices (developed from the OSHA 10 Hour Safety Training), basic construction math, hand tools, power tools, construction drawings, basic rigging, basic communication skills, basic employability skills, and materials handling. Successful completion of this course with a 70% or higher will earn the student recognized credit through NCCER, which is required for many entry level positions in the construction industry.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): ELEC 1006 , ELEC 1106  
  
  • SFSE 1003 Seminar in First-Year Student Experience

    (3-0-0) 3 Credits UT
    SFSE 1003 is designed to foster student success by enhancing personal, collegiate, and professional self-awareness through life-long learning and career development.  Topics include college resources, self-awareness, academic skills and strategies, and career planning.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • SOCI 2010 Introductory Sociology

    (3-0-0) 3 Credits UT
    SOCI 2010 is a survey of the essential concepts, processes, and institutions of modern society. Specifically, emphasis is upon the nature of culture and society, socialization processes, institutional arrangements, and the mechanisms of socio-cultural change which function together in an interplay of relationships to comprise human society. SOCI 2010 is summarized as: an introduction to major subject areas, theoretical perspectives, basic research methods, culture, socialization, social organization, institutions, inequality, and social change. Equivalent to CSOC 2013, Introduction to Sociology, [Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • SOCI 2020 Contemporary Social Problems

    (3-0-0) 3 Credits UT
    SOCI 2020 focuses on current social problems in American society with attention to using social planning and existing resources to formulate solutions. Equivalent to CSOC 2113, Social Problems, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • SOCI 2040 Sex and Gender Roles

    (3-0-0) 3 Credits UT
    This course explores issues related to gender across time and in contemporary society. Content includes social origins of gender roles, the influence of biology on gender; socialization into gender roles; gender-based inequality in the family, employment, politics, and health; multicultural variations in gender roles, and future directions of gender roles.
    Pre-requisite(s): SOCI 2010   Concurrency: None Co-requisite(s): None
  
  • SOCI 2050 Marriage and Family

    (3-0-0) 3 Credits UT
    SOCI 2050 is designed to introduce students to the sociological analysis of family, including an investigation of family as a cultural unit and a social institution. Topics include role definitions, gender, the dynamics of courtship and love, mate selection, parenting, and divorce. Equivalent to CSOC 2213, Marriage and Family, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): SOCI 2010   Concurrency: None Co-requisite(s): None
  
  • SOCI 2073 Sociology of Leadership

    (3-0-0) 3 Credits UT
    Sociology 2070 focuses on principles of sociology and leadership from a sociological perspective to facilitate an enhancement to ones social life and that of others.  The sociology of leadership incorporates aspects of psychology, business, economics, and historical studies to address a leader’s talents, style, knowledge and overall behavior as one interacts with groups, organizations, and society. This class is important for future leaders in a variety of fields to include, but not limited to business, sociology, psychology, economics, and history as it will provide a well-rounded understanding of leadership.
    Pre-requisite(s): PSYC 2010  or SOCI 2010   Concurrency: None Co-requisite(s): None
  
  • SPAN 1010 Elementary Spanish

    (3-2-0) 4 Credits UT
    A beginning course for students with no knowledge of Spanish. All appropriate elements of basic language learning are utilized for the purpose of providing a foundation in the language and culture of countries where Spanish is spoken. This course presents structures, vocabulary, and culture with an emphasis on pronunciation, language skills, and fundamental grammatical structures. Lab attendance recommended to aid better aural-oral comprehension. SPAN 1010 is summarized as basic lexicon and structure of Spanish; emphasis on the four basic skills (listening, speaking, reading, and writing) and culture of the Spanish-speaking world. Beginning course: no previous knowledge of Spanish expected or required. Equivalent to CSPN 1013, Elementary Spanish I Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • SPAN 1020 Elementary Spanish II

    (3-2-0) 4 Credits UT
    This course, which follows SPAN 1010  Elementary Spanish I, serves as a presentation of additional Spanish structures, vocabulary and culture based on four-skill development (speaking, listening, reading, and writing). Lab attendance is required to aid better aural-oral comprehension. This course is summarized as a continuation of the study of Spanish on the elementary level. Equivalent to CSPN 1024, Elementary Spanish II Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): SPAN 1010   Concurrency: None Co-requisite(s): None
  
  • SPAN 2010 Intermediate Spanish

    (4-0-0) 4 Credits UT
    This course, which follows SPAN 1020  Elementary Spanish II, serves as a presentation of additional Spanish structures, vocabulary and culture based on four-skill development (speaking, listening, reading, and writing). SPAN 2010 is summarized as a continuation of the study of Spanish on the intermediate level. Equivalent to CSPN 2014, Intermediate Spanish I Louisiana Board of Regents Common Course Matrix
    Pre-requisite(s): SPAN 1020  Concurrency: None Co-requisite(s): None
  
  • SPCH 1200 Public Speaking

    (3-0-0) 3 Credits UT
    Study and application of basic principles of effective extemporaneous speaking, including audience analysis and adaptation, topic selections, research, organization, and presentation skills. Students deliver, listen to and critique a variety of speeches. Equivalent to CCOM 2013, Public Speaking, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: ENGL 1010   Co-requisite(s): None
  
  • SPCH 2030 Group Problem Solving

    (3-0-0) 3 Credits UT
    Theories of small task group dynamics. Applies techniques for creative and structured problem solving.
    Pre-requisite(s): SPCH 1010   Concurrency: None Co-requisite(s): None
  
  • TECM 1110 Technical Math I

    (3-0-0) 3 Credits UN
    This course is a study of algebra, right triangle trigonometry, coordinate systems and numerical computations. It is required for selected technical programs and may not replace any learning foundations or general education requirements.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • THEA 1010 Introduction to Theatre and Performing Arts

    (3-0-0) 3 Credits UT
    Surveying the evolution of dramatic performance including acting, directing, writing, and visual representation, from sociopolitical ritual to contemporary theatre and performance art. THEA 1010 is summarized as basic aspects, theatre arts, and vocabulary of theatre and dramatic arts, past and present; appreciation and understanding of diverse traditions. The course Includes opportunities for experiencing live or recorded theatrical performance. Equivalent to CTHE 1013, Introduction to Theatre, [Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • THEA 2010 Introduction to Acting

    (3-0-0) 3 Credits UT
    The study and performance of selected screenplays and stage scripts based on contemporary acting, movement, and voice theories. Improvisational exercises will develop audition, characterization, and direction techniques. THEA 2010 is summarized as an introduction to acting through improvisation, thought, emotion, intention, body awareness and movement. The course develops a firm foundation in basic acting techniques. Equivalent to CTHE 2103, Acting I, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • THEA 2070 Introduction to Film Performance

    (3-0-0) 3 Credits UT
    Performance and study of multiple character screenplays based on contemporary procedures and practices in filmed performance. Rehearsals will focus on character development for film, taking direction, performance critiques, camera positioning, movement, and social interaction.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
 

Page: 1 | 2 | 3 | 4 | 5 | 6