Apr 19, 2024  
2016-2017 College Catalog 
    
2016-2017 College Catalog [ARCHIVED CATALOG]

Course Descriptions


SLCC Prefix Key

Following is an alphabetical list of descriptions of courses offered by South Louisiana Community College. Each course is listed alphabetically, by a four-letter prefix and course number, followed by four numbers (x-x-x-x). These four numbers in parentheses indicate lecture hours per week, lab hours per week, equivalent internship/clinical/work experience per week and total credit hours, for a 15 week semester as shown below. If the semester length is reduced the number of hours will be proportionately increased (i.e. In a 12 week semester these hours are increased by a third, in an 8 week semester they will double and in a 4 week semester they will quadrupled). When enrolling, be careful of mixing semester lengths as the hour requirements for courses may overlap each other and not allow you to complete any course. Remember you are required to complete all the instructional activities and meet course class attendance requirements. Work with your advisor if you required enrolling in differing semester lengths to ensure there are no time clashes.

Course Prefix Course Number Course Title Hrs. of Lecture per wk. Hrs. of Lab per wk. Equivalent Hrs. of Internship/ Clinical/Work Experience per wk. * Credit hours
ENGL 1010 Rhet & Comp 3 0 0 3


* The hours that are required for Internship/ Clinical/ Work Experience have been expressed as if they occur each week in a typical 15 week semester. This may not be case and this experience may be full-time over several weeks of the semester. Please work with an Advisor to understand the commitment required to complete such activities and how they will influence your scheduling of other classes.

Classification of Courses; D, UN, UT

  • Those courses labeled with a “D” and numbered 0-0999 are developmental, and credits earned may not be used to satisfy degree requirements.
  • Courses numbered 1000-1999 are freshman-level courses designed primarily for students of this classification.
  • Courses numbered 2000-2999 are sophomore-level courses designed primarily for students of this classification
  • Courses labeled with “UN” are undergraduate courses that are nontransferable credits
  • Courses labeled “UT” are undergraduate transferable credits.

Pre-requisites, Concurrency, Co-requisites

Some courses have pre-requisites, concurrency, or co-requisites listed.

A Prerequisite is an academic requirement that must be satisfied prior to enrolling in a course. A student requesting a course must have completed all pre-requisites listed for that course or must otherwise demonstrate to the instructor and appropriate Divisional Dean that s/he has had the equivalent preparation.

The statement of Concurrency in the course description describes a student’s ability to take a course and its pre-requisites(s) in the same term. A statement of “none” means there is no ability to take the courses pre-requisites at the same time as the required course. In this case you must have must have completed the required pre-requisites in an earlier semester. If course codes appear are listed after the Concurrency requirement it indicates that these pre-requisites can be taken at the same time as the course.

A Co-requisite is an academic requirement that a course must be taken together with another course(s) in the same semester. This requires that a student must enroll in theses co-requisite courses in addition to the required course. Failure to do so will not allow you to enroll. A student who believes they have satisfied the pre requisite requirements must demonstrate this to the appropriate Divisional Dean that s/he has either had the prior or equivalent preparation or is currently satisfying the requirement. Descriptions of courses should be read in order to determine if there are required pre-requisites or co-requisites that must be satisfied.

Course Description and Louisiana Board of Regents Common Course Matrix equivalency
A short description of the course content will be made in the paragraphs below the course title. If the course has equivalency in the common course matrix of the Louisiana Board of Regents, the equivalent code will be stated along with the short course description.

 
  
  • CLTS 1410 Clinical Chemistry I

    (2-2-0) 3 Credits UN
    Lecture and laboratory demonstration, performance of the clinical chemistry principles of analytical techniques, instrumentation and methodology used in the clinical laboratory. The use and care of equipment and reagents, quality control and possible sources of technical errors are stressed. Emphasis on laboratory testing relating to hepatic and renal function, amino acids, proteins, non-protein nitrogen, and other organ and tissue functions.
    Pre-requisite(s): CHEM 1030 , CHEM 1031 , CLTS 1030 , and CLTS 1131   Concurrency: None Co-requisite(s): None.
  
  • CLTS 1453 Body Fluid Analysis

    (2-2-0) 3 Credits UN
    The analysis of urine and other body fluids. Includes: renal physiology and urine formation; specimen collection and handling; routine urinalysis and interpretations; special urine and renal function tests; other body fluid analyses and related diseases.
    Pre-requisite(s): CHEM 1030 , CHEM 1031 , CLTS 1130 , CLTS 1131  Concurrency: None Co-requisite(s): None.
  
  • CLTS 2060 Clinical Microbiology II

    (3-0-0) 3 Credits UN
    A continuation of the first microbiology courses (CLTS 1030  & CLTS 1131 ). Focus is placed on categorizing clinically significant bacteria according to taxonomy, and identifying these bacteria by appropriate methods. The different categories are based on gram stain reactions, morphology, environmental requirements and biochemical reactions. Mycology, virology and other microorganisms and miscellaneous bacteria are discussed to a lesser degree.
    Pre-requisite(s): CLTS 1030 , CLTS 1130 , CLTS 1131 , CLTS 1030  Concurrency: None Co-requisite(s): CLTS 2061  
  
  • CLTS 2061 Clinical Microbiology Lab II Lab

    (0-2-0) 1 Credits UN
    Laboratory to accompany CLTS 2060 to include: specimen collection, isolation and identification of clinically significant microorganisms in Clinical Microbiology, quality control and quality assurance.
    Pre-requisite(s): CLTS 1130 , CLTS 1131 , CHEM 1030 , CHEM 1031 , CLTS 1030  Concurrency: None Co-requisite(s): CLTS 2060  
  
  • CLTS 2073 Hematology II

    (2-2-0) 3 Credits UN
    A continuation of Hematology I with emphasis on: theories, techniques, and laboratory analyses of hemostasis and coagulation; laboratory detection of diseases associated with abnormal blood cells (WBC, RBC & platelets).
    Pre-requisite(s): CLTS 1073   Concurrency: None Co-requisite(s): None.
  
  • CLTS 2203 Clinical Immunohematology

    (2-2-0) 3 Credits UN
    Theory, principles and laboratory procedures of Immunohematology, including: donor blood collection, blood component preparation and use, antigen-antibody reactions, blood groups, compatibility testing, and antibody studies.
    Pre-requisite(s): CLTS 1203   Concurrency: None Co-requisite(s): None.
  
  • CLTS 2410 Clinical Chemistry II

    (3-0-0) 3 Credits UN
    A continuation of Clinical Chemistry I. Emphasis on the analyses and correlation with disease of renal, cardiac, pulmonary, musculoskeletal, pancreatic and hepatic functions; carbohydrates; lipids; electrolytes; blood gases; hormones; enzymes; cerebrospinal fluid, gastric and amniotic fluids. Also includes toxicology, immunochemical techniques and automation.
    Pre-requisite(s): CLTS 1410   Concurrency: None Co-requisite(s): CLTS 2411  
  
  • CLTS 2411 Clinical Chemistry II Lab

    (0-2-0) 1 Credits UN
    Laboratory to accompany MLTS 2410: chemical analysis of body fluids using manual methods and basic instrumentation
    Pre-requisite(s): CLTS 1410   Concurrency: None Co-requisite(s): CLTS 2410  
  
  • CLTS 2812 Hematology Practicum

    (0-0-2) 2 Credits UN
    This course includes clinical experience in the hospital laboratory setting or clinical laboratory. Laboratory practice includes routine diagnostic tests. Clinical conference time is included with the instructor. Written exams are an integral part of this practicum. The practicum will be in the following areas: Hematology/Coagulation/Urinalysis 4 weeks with a minimum of 30 hours a week in the laboratory.
    Pre-requisite(s): CLTS 2203   Concurrency: None Co-requisite(s): CLTS 2822 , CLTS 2832 , and CLTS 2842 
  
  • CLTS 2822 Chemistry Practicum

    (0-0-2) 2 Credits UT
    This course includes clinical experience in the hospital laboratory setting or clinical laboratory. Laboratory practice includes routine diagnostic tests. Clinical conference time is included with the instructor. Written exams are an integral part of this practicum. The practicum will be in the following areas: Chemistry/Phlebotomy/Lab Safety in 4 weeks with a minimum of 30 hours a week in the laboratory.
    Pre-requisite(s): CLTS 2203   Concurrency: None Co-requisite(s): CLTS 2812 , CLTS 2832 , and CLTS 2842 .
  
  • CLTS 2832 Blood Bank Practicum

    (0-0-2) 2 Credits UT
    This course includes clinical experience in the hospital laboratory setting or clinical laboratory. Laboratory practice includes routine diagnostic tests. Clinical conference time is included with the instructor. Written exams are an integral part of this practicum. The practicum will be in the following areas: Blood Bank/Immunology/Serology in 4 weeks with a minimum of 30 hours a week in the laboratory.
    Pre-requisite(s): CLTS 2203   Concurrency: None Co-requisite(s): CLTS 2812 , CLTS 2822 , and CLTS 2842  
  
  • CLTS 2842 Microbiology Practicum

    (0-0-2) 2 Credits UT
    This course includes clinical experience in the hospital laboratory setting or clinical laboratory. Laboratory practice includes routine diagnostic tests. Clinical conference time is included with the instructor. Written exams are an integral part of this practicum. The practicum will be in the following areas: Microbiology/Parasitology/Mycology in 4 weeks with a minimum of 30 hours a week in the laboratory.
    Pre-requisite(s): CLTS 2203   Concurrency: None Co-requisite(s): CLTS 2812 , CLTS 2822 , and CLTS 2832 
  
  • CLTS 2910 Seminar in Clinical Laboratory Science

    (2-0-0) 2 Credits UT
    Reinforce the roles of the clinical laboratory technician within the medical laboratory, including: basic laboratory techniques, clinical laboratory specializations, laboratory organization, professional ethics, cultural competence, medical terminology, safety, quality assurance & quality control, glassware, equipment, and measurements used. Introduction to phlebotomy and other specimen collection procedures along with appropriate specimen containers and specimen processing. The role of regulatory agencies, state licensure, and national registry such as ASCP.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • CMCN 1170 Introduction to Film Production

    (3-0-0) 3 Credits UT
    An introduction to filmmaking theory and application by way of a project based orientation to production, lighting, acting, cinematography, editing, and sound.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • CMCN 1270 Introduction to Film Editing

    (3-0-0) 3 Credits UT
    An introduction to the basic elements of nonlinear film editing in a laboratory environment.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • CMCN 2050 Introduction to Mass Communication and Media

    (3-0-0) 3 Credits UT
    Broad survey of mass communication stressing the history, theory, criticism, socioeconomic, and political aspects of the discipline.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • CMCN 2145 Screenwriting & Scene Development

    (3-0-0) 3 Credits UT
    This course orients students to the textual, technical and communicative processes of screenwriting from conceptualization to completion with emphasis on film and television content.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • CORR 2030 Corrections Process

    (3-0-0) 3 Credits UT
    The historical and social settings of corrections; theories and practices in corrections; correctional programs in institutions and the community. Equivalent to CCRJ 2013, Introduction to Corrections, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • CORR 2035 Ethics in Corrections

    (3-0-0) 3 Credits UT
    Ethical, professional, and legal issues encountered by probation, institutional and parole staff; exploration of rights of correctional clients to choose treatment approach, use of authority, and rights of offenders.
    Pre-requisite(s): CJUS 1010   Concurrency: None Co-requisite(s): None
  
  • CORR 2045 Correctional Law

    (3-0-0) 3 Credits UT
    Study of the legal rights and obligations of the convict-probationer, inmate, and parolee; survey methods of enforcing both rights and obligations and the responsibilities of correctional agencies and personnel under correction law (constitutional, statutory, and regulatory provisions).
    Pre-requisite(s): CORR 2030   Concurrency: None Co-requisite(s): None.
  
  • CORR 2055 Local Adult Detention Facilities

    (3-0-0) 3 Credits UT
    Study of security procedures in adult detention facilities, the criteria for effective supervision of inmates, the correctional aspects of inmate discipline, and the handling of special inmates; presents concepts, programs, and planning considerations for jail management and the operation of adult detention facilities.
    Pre-requisite(s): CORR 2030   Concurrency: None Co-requisite(s): None
  
  • CORR 2065 Correctional Counseling

    (3-0-0) 3 Credits UT
    Presents concepts and principles of interviewing and counseling as applied in the correctional setting.
    Pre-requisite(s): CORR 2030   Concurrency: None Co-requisite(s): None
  
  • CORR 2075 Probation, Parole, and Treatment

    (3-0-0) 3 Credits UT
    Survey the philosophy, history, organization, personnel and functioning of traditional and innovative probation and parole programs; considers major treatment models for clients.
    Pre-requisite(s): CORR 2030   Concurrency: None Co-requisite(s): None
  
  • CORR 2085 Narcotics and Dangerous Drugs

    (3-0-0) 3 Credits UT
    Survey the historical and current usage of narcotics and dangerous drugs; teaches the identification and classification of such drugs and emphasizes the symptoms and effects on their users; examines investigative methods and procedures utilized in law enforcement efforts against illicit-drug usage.
    Pre-requisite(s): CORR 2030   Concurrency: None Co-requisite(s): None
  
  • CORR 2095 Management of Correctional Facilities

    (3-0-0) 3 Credits UT
    Describes management options and operational implications for staffing, security, safety, and treatment consider impact of changes in public policy on corrections.
    Pre-requisite(s): CORR 2030   Concurrency: None Co-requisite(s): None
  
  • COSM 1002 Properties of Skin, Scalp, and Hair

    (0-4-0) 2 Credits UN
    In this course the skin and scalp are analyzed according to structure and function. Diseases of the skin, scalp, and hair are explored.
    Pre-requisite(s): None Concurrency: COSM 1003 , COSM 1004 , COSM 1104 , COSM 1102  Co-requisite(s): None 
  
  • COSM 1003 Shampooing, Rinsing, and Conditioning

    (1-4-0) 3 Credits UN
    This course includes discussion and student demonstration of shampooing, rinsing, and conditioning using appropriate solutions and techniques for each procedure to meet the client’s individual needs.
    Pre-requisite(s): None Concurrency: COSM 1002 , COSM 1004 , COSM 1104 , COSM 1102   Co-requisite(s): None
  
  • COSM 1004 Introduction, Decontamination, and Infection Control

    (1-6-0) 4 Credits UN
    This course includes history, ethics, grooming, safety, and first aid. The LA State Board of Cosmetology Rules and Regulations are discussed. Types and methods of decontamination and sanitation are explained and demonstrated.
    Pre-requisite(s): None Concurrency: COSM 1003 , COSM 1002 , COSM 1102 , COSM 1004  Co-requisite(s): None
  
  • COSM 1102 Cells, Anatomy, and Physiology

    (1-3-0) 2 Credits UN
    The basic functions of organs and body systems related to specific cosmetology skills are discussed in this course.
    Pre-requisite(s): None Concurrency: COSM 1002 , COSM 1003 , COSM 1004 , COSM 1104  Co-requisite(s): None
  
  • COSM 1103 Manicuring and Pedicuring

    (1-6-0) 3 Credits UN
    Identification of composition and structure of the nails, as well as characteristics of nail disorders/ diseases are explained in this course. Manicure and pedicure procedures are discussed and performed using appropriate safety precautions. Nail tip and wrap application as well as UV Gel applications will be taught.
    Pre-requisite(s): COSM 1002 , COSM 1003 , COSM 1004 , COSM 1104 , COSM 1102  Concurrency: COSM 1213 , COSM 1304 , COSM 1315  Co-requisite(s): None
  
  • COSM 1104 Wet Hair Styling

    (1-9-0) 4 Credits UN
    Facial shapes, profiles, and body structures are analyzed in order to suggest the most becoming hairstyles for clients. Student demonstration of a variety of hairstyles is a part of this course. Identification, discussion, and student demonstration of various thermal services are covered in this course.
    Pre-requisite(s): None Concurrency: COSM 1002 , COSM 1003 , COSM 1004 , COSM 1102  Co-requisite(s): None
  
  • COSM 1213 Hair Cutting

    (0-9-0) 3 Credits UN
    Equipment and procedures for hair shaping techniques are covered in this course. Facial shapes, profiles, and body structure are analyzed to meet client’s needs and desires for an attractive cut. Student demonstration of hair shaping techniques is a part of this course.
    Pre-requisite(s): COSM 1002 , COSM 1003 , COSM 1004 , COSM 1102 , COSM 1104  Concurrency: COSM 1103 , COSM 1304 , COSM 1315  Co-requisite(s): None
  
  • COSM 1304 Facial Services, Massage, and Make-Up

    (2-4-0) 4 Credits UN
    In this course skin types are discussed in order to recommend and perform appropriate facial treatments and massage movements. Factors affecting the choice and application of cosmetic make-up are also explored. Student performance is a part of this course. In this course, students will learn the basics of electricity and learn the different currents for facial equipment.
    Pre-requisite(s): COSM 1002 , COSM 1003 , COSM 1004 , COSM 1102 , COSM 1104  Concurrency: COSM 1103 , COSM 1213 , COSM 1315  Co-requisite(s): None
  
  • COSM 1315 Permanent Waving

    (2-6-0) 5 Credits UN
    This course covers the history and trends of permanent waving as well as the methods, procedures, and skills required for the types of permanent waves available to clients. Student demonstration of permanent waving procedures is a part of this course. History and trends of chemical hair relaxing methods and procedures are discussed and demonstrated. Student demonstration of methods and procedures are a part of this course.
    Pre-requisite(s): COSM 1002 , COSM 1003 , COSM 1004 , COSM 1102 , COSM 1104  Concurrency: COSM 1103 , COSM 1213 , COSM 1304  Co-requisite(s): None
  
  • COSM 2104 Introduction to Salon Management

    (3-3-0) 4 Credits UN
    Students begin to learn business theory in order to plan, operate, and manage the school-based salon according to the LA State Board of Cosmetology rules and regulations under instructor supervision.
    Pre-requisite(s): COSM 1002 , COSM 1003 , COSM 1004 , COSM 1104 , COSM 1102 , C or Better in LFEN 83  or LFEN 93  or 18 better on ACT or Compass English 68+, or SAT English 430+ C or better in LFMA 83  or LFMA 93   or ACT score of 19 or better, or Compass Pre-Algebra score of 64+, or Compass Algebra score of 40+, or SAT Math score of 450, Successfully completed or has an approved exemption of CCFS 1003 with a “C” or better. Concurrency: COSM 2105 , COSM 2203 , COSM 2215   Co-requisite(s): None
  
  • COSM 2105 Hair Coloring

    (1-8-0) 5 Credits UN
    This course includes the fundamentals of temporary, semi-permanent, and permanent hair color and the methods, skills, and procedures required for each. Student demonstration is a part of this course.
    Pre-requisite(s): COSM 1002 , COSM 1003 , COSM 1004 , COSM 1104 , COSM 1102  C or Better in LFEN 83  or LFEN 93  or 18 better on ACT or Compass English 68+, or SAT English 430+ C or better in LFMA 83  or LFMA 93  or ACT score of 19 or better, or Compass Pre-Algebra score of 64+, or Compass Algebra score of 40+, or SAT Math score of 450 `Successfully completed or has an approved exemption of CCFS 1003 with a “C” or better. Concurrency: COSM 2104 , COSM 2203 , COSM 2215   Co-requisite(s): None
  
  • COSM 2115 Clinic Floor Experience I

    (0-10-0) 5 Credits UN
    Students practice various aspects of operating a salon: scheduling, inventory, customer service, marketing and salon services.
    Pre-requisite(s): COSM 1103 , COSM 1213 , COSM 1304 , COSM 1315  Concurrency: None Co-requisite(s): None
  
  • COSM 2203 Artistry of Artificial Hair

    (2-3-0) 3 Credits UN
    The student studies the types, uses, and special care techniques of wigs and hair accessories.
    Pre-requisite(s): COSM 1002 , COSM 1003 , COSM 1004 , COSM 1104 , COSM 1102  C or Better in LFEN 83  or LFEN 93  or 18 better on ACT or Compass English 68+, or SAT English 430+ C or better in LFMA 83  or LFMA 93  or ACT score of 19 or better, or Compass Pre-Algebra score of 64+, or Compass Algebra score of 40+, or SAT Math score of 450 `Successfully completed or has an approved exemption of CCFS 1003 with a “C” or better. Concurrency: COSM 2104 , COSM 2105 , COSM 2215   Co-requisite(s): None
  
  • COSM 2215 Clinic Floor Experience II

    (0-10-0) 5 Credits UN
    Students practice various aspects of running a salon: scheduling, inventory, accounting, customer service, marketing salon services and HR. This is a practical experience, hands-on course.
    Pre-requisite(s): COSM 2115 C or Better in LFEN 83  or LFEN 93  or 18 better on ACT or Compass English 68+, or SAT English 430+ C or better in LFMA 83  or LFMA 93  or ACT score of 19 or better, or Compass Pre-Algebra score of 64+, or Compass Algebra score of 40+, or SAT Math score of 450+ Successfully completed or has an approved exemption of CCFS 1003 with a “C” or better. Concurrency: COSM 2104 , COSM 2105 , COSM 2203  Co-requisite(s): None
  
  • CULN 1102 Essentials of Dining Room Service

    (1-3-0) 2 Credits UN
    A study of types of service used to enhance dining pleasure, as well as the preparation of beverages.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): CULN 1103 , CULN 1203 , CULN 1207 
  
  • CULN 1103 Culinary Calculations

    (3-0-0) 3 Credits UN
    In this course students solve culinary problems using fundamental math skills including cost per serving, adjusting recipe yields, and total cost and quantity of recipes.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): CULN 1102 , CULN 1203 , CULN 1207 
  
  • CULN 1203 Sanitation and Safety

    (3-0-0) 3 Credits UN
    This course identifies all the tasks that employees, managers and food safety professionals need to know to keep food safe in their establishment. The information presented is based upon the latest FDA Model Food Code, food safety science and best practices in the industry. Students prepare and test for the ServSafe IBC.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): CULN 1102 , CULN 1203 , CULN 1207 
  
  • CULN 1207 Introduction to Culinary Skills

    (3-12-0) 7 Credits UN
    Students will explore career options, personal traits, tools/equipment, recipe use, menu making, as well as the “mise en place” preparation principle for effective time management are studied. Students will develop an understanding of the hospitality industry and career opportunities in the field. Students will investigate trade publications and professional organizations appropriate for continuing education. Students will become familiar with the structure and basic functions of departments within hospitality and foodservice establishments.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): CULN 1102 , CULN 1203 , CULN 1103 
  
  • CULN 1216 Culinary Production for Dining Facilities

    (1-16-0) 6 Credits UN
    This is the first course in which students learn in a full-production kitchen laboratory that provides meals for external customers. In this course students build on knife skills, mise en place, sanitation, and basic cooking methods learned in Introduction to Culinary Skills. Instruction will focus on batch cooking skills, sanitation, station organization, recipe reading and menu planning. In this course students also learn Acadian and Creole Regional Cuisines. Working in teams they create portfolios documenting research, menus, and recipes; order requisitions; and production schedules for the preparation of a specified number and variety of batch meals emphasizing Acadian and Creole regional cuisines.
    Pre-requisite(s): None Concurrency: CULN 1207 Introduction to Culinary Skills   Co-requisite(s): None
  
  • CULN 1223 Nutrition

    (3-0-0) 3 Credits UN
    Discussion of the My Plate guidelines, essential nutrients, and the importance of meeting nutritional needs throughout the life cycle when planning menus.
    Pre-requisite(s): CULN 1102 , CULN 1103 , CULN 1203 , CULN 1207   Concurrency: CULN 1216 , CULN 1233  Co-requisite(s): None
  
  • CULN 1233 Food and Beverage Operations

    (3-0-0) 3 Credits UN
    This course is an overview of the operational and managerial aspects of restaurant ownership. Topics in this course include designing, organizing, equipping, staffing and managing restaurant kitchens and dining rooms. Students will also become familiar with par levels, methods of inventory and ordering products; technologies used in restaurants; business and marketing plans; financing and leasing; and legal and tax matters.
    Pre-requisite(s): CULN 1102 , CULN 1103 , CULN 1203 , CULN 1207   Concurrency: CULN 1216 , CULN 1233  Co-requisite(s): None
  
  • CULN 2303 Baking & Pastry I

    (1-6-0) 3 Credits UN
    In this course students learn the basic baking principles and the function of common ingredients used in a commercial bakeshop. Labs are designed to provide students with hands-on experiences producing yeast dough products, quick breads, cookies, pies, pastries and meringues.
    Pre-requisite(s): CULN 1102 , CULN 1103 , CULN 1203 , CULN 1207  
      Concurrency: CULN 1216 , CULN 1223 , CULN 1233  Co-requisite(s): None
  
  • CULN 2409 A la Carte

    (3-12-0) 9 Credits UN
    This course instructs students in the skills needed to operate in an a la carte kitchen. This course builds on the foundational skills taught in Introduction to Culinary Skills, and batch cookery taught in Culinary Production for Dining Facilities. During this course students rotate among a la carte stations to produce menu items from soup, salad and sandwich station; sauté/griddle station, fry station, grill station. In the a la carte setting, students further develop skills of organization, timing and sequencing, speed, efficiency, accuracy, and communication. In this course students also create an International Cuisine portfolio. The portfolio documents the student’s research, menu development and preparation of a specified number and variety of international meals, using advanced skills, instructor-prepared criteria, and evaluation processes.
    Pre-requisite(s): CULN 1216  , C or Better in LFEN 83  or LFEN 93  or 18 better on ACT or Compass English 68+, or SAT English 430+ C or better in LFMA 83  or LFMA 93  or ACT score of 19 or better, or Compass Pre-Algebra score of 64+, or Compass Algebra score of 40+, or SAT Math score of 450+ Concurrency: CULN 2413   Co-requisite(s): None
  
  • CULN 2413 Baking & Pastry II

    (1-6-0) 3 Credits UN
    In this course students will build on principles and techniques learned in Baking I to prepare cakes, icings, creams, custards, puddings, sauces, and frozen desserts.
    Pre-requisite(s): CULN 2303 , C or Better in LFEN 83  or LFEN 93  or 18 better on ACT or Compass English 68+, or SAT English 430+ C or better in LFMA 83  or LFMA 93  or ACT score of 19 or better, or Compass Pre-Algebra score of 64+, or Compass Algebra score of 40+, or SAT Math score of 450+ Successfully completed or has an approved exemption of CCFS 1003 with a “C” or better. Concurrency: CULN 2409  Co-requisite(s): None
  
  • DGMD 1100 Color & Design

    (2-2-0) 3 Credits UN
    This introductory course will examine the principles of color theory and design. Students will gain an understanding of color relationships, as well as learn to identify, and analyze the principles and elements of design. Students will utilize these theories and principles in the creation of their own unique designs. This class involves creative hands-on activities. The Adobe Creative Suite will be used frequently to complete assignments.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • DGMD 1120 Introduction to Digital Graphics

    (2-2-0) 3 Credits UN
    This course provides the basic skills necessary to utilize vector and raster software on a Macintosh operating system to produce graphics for use in the digital media industry. Files for print and non-print production applications will be created. Students will learn how to separate color, improve poor images, photographs, and scanned images through a variety of tools and techniques to improve color, tone, and contrast.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • DGMD 1130 Typography & Page Layout

    (2-2-0) 3 Credits UN
    This course helps students gain an understanding of well-designed page layout and the effects produced by various fonts and typographic techniques. It provides a historical overview and in-depth explanations of the formal qualities of characters and typefaces. Adobe InDesign aids students’ participation in group discussions and critiques as they work through projects.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): DGMD 1100 , DGMD 1120 , DGMD 1140 
  
  • DGMD 1140 Drawing I

    (2-2-0) 3 Credits UN
    This is a studio course with emphasis on accurate observation and representation, informed use of drawing materials, and awareness of two-dimensional art elements. Graphic design principles will be utilized in group discussions and critiques as students work through projects.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): DGMD 1100 , DGMD 1120 , DGMD 1130  
  
  • DGMD 1150 Drawing II

    (2-2-0) 3 Credits UN
    This is an intermediate studio course with emphasis on accurate observation and representation, informed use of drawing materials, and awareness of two-dimensional art elements. Graphic design principles will be utilized in group discussions and critiques as students work through projects.
    Pre-requisite(s): None Concurrency: DGMD 2300 , DGMD 2350  Co-requisite(s): None
  
  • DGMD 2001 Capstone in Digital Media

    (1-0-0) 1 Credits UN
    The course serves as a capstone to the Digital Media program and invites students to showcase their degree work.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • DGMD 2300 Intro to Digital Video

    (2-2-0) 3 Credits UN
    This course is an introduction to the field of digital video and video editing, including the history and overview of analog and digital video, exploration of digital video career options and industry trends and the application of non-linear video editing. Students will work hands-on with nonlinear editing software to make movies for digital media presentations and the World Wide Web.
    Pre-requisite(s): DGMD 1100  Concurrency: DGMD 1150 , DGMD 2350  Co-requisite(s): None
  
  • DGMD 2350 Introduction to Motion Graphics

    (2-2-0) 3 Credits UN
    This course trains students in basic techniques of motion graphics creation through the use of software programs utilized by design and animation companies worldwide. This course emphasizes design from a problem-solving point of view, and continues the production timeline and graphical requirements of a multimedia project by demonstrating the manipulation of digital images in a studio environment. In this course, students gain a thorough understanding of input/output techniques, special effects, image compositing, and motion graphics.
    Pre-requisite(s): DGMD 1100  Concurrency: DGMD 1150 , DGMD 2300  Co-requisite(s): None
  
  • DGMD 2500 Introduction to Web Design

    (2-2-0) 3 Credits UN
    This course introduces basic technology concepts related to the Internet, web pages, online tools and other technologies. It is designed to develop a fundamental set of skills and knowledge necessary in the strategic development, planning, design and production of effective web design. This course explores how websites work, types of websites, the development process, Internet marketing, SEO, and law & ethics. This is a hands-on course, focused on learning-by-doing, and includes a lecture component.
    Pre-requisite(s): DGMD 1100  Concurrency: DGMD 2510 , DGMD 2700 , LFMA 83 , LFEN 83  or eligibility MATH 1105 , ENGL 1010   Co-requisite(s): None
  
  • DGMD 2510 Introduction to Web Design Software

    (2-2-0) 3 Credits UN
    This course introduces the tools and technologies graphic artists utilize to develop and maintain websites. It is designed to develop a fundamental set of skills and knowledge necessary to command Adobe Dreamweaver, Photoshop and Fireworks. The course will also address content management systems (CMS) that include Wordpress. This is a hands-on course, focused on learning-by-doing, and includes a lecture component.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • DGMD 2520 Website Design

    (2-2-0) 3 Credits UN
    This course introduces the tenets of effective website design utilized to create engaging and easy to use websites. The student will use design principles to build appealing webpages using Adobe software and content management systems. This is a hands-on course, focused on learning-by-doing, and includes a lecture component.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • DGMD 2530 Introduction to Web Development Languages

    (2-2-0) 3 Credits UN
    This course introduces the basic concepts of web development languages and web servers. It is designed to develop a fundamental set of skills and knowledge necessary for back-end web development. This course explores HTML, CSS, JavaScript, JQuery, CMS, Apache & SQL, MySQL, PHP and Linux 5 Permissions. This is a hands-on course, focused on learning-by doing, and includes a lecture component.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • DGMD 2540 Website Production

    (2-2-0) 3 Credits UN
    This course uses the tenets of effective website design to create engaging and easy to use websites. The student will design and publish functioning webpages using Adobe software and WordPress content management systems. Cross browser compatibility, content integration, mobile design and responsive design will be addressed. This is a hands-on course, focused on learning-by-doing, and includes a lecture component.
    Pre-requisite(s): None Concurrency: DGMD 2500 , DGMD 2510 , DGMD 2520  Co-requisite(s): None
  
  • DGMD 2700 Foundations for 3D Art.

    (2-2-0) 3 Credits UN
    This course introduces basic concepts related to the developments of 3-dimensional computer art. It is designed to develop a fundamental set of skills and knowledge necessary to create 3D art and animation. This course explores character design, storytelling, sketching, 3D drawing, anatomy, acting/performance, sculpting, and 3D physics. This is a hands-on course, focused on learning-by-doing, and includes a lecture component.
    Pre-requisite(s): DGMD 1100  Concurrency: DGMD 2500 , DGMD 2510  Co-requisite(s): None
  
  • DGMD 2710 Adobe Photoshop/Illustrator for 3D Art

    (2-2-0) 3 Credits UN
    This course introduces strategies for using Adobe graphic design software in 3 dimensional computer art. It is designed to develop a fundamental set of skills and knowledge necessary to create 3D art and animation. Among other things, this course explores 3D conversion, depth mapping, and color theory. This is a hands-on course, focused on learning-by-doing, and includes a lecture component.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • DGMD 2720 Digital Editing and Effects

    (2-2-0) 3 Credits UN
    This course introduces basic concepts related to editing and applying digital effects to digital video. It is designed to develop a fundamental set of skills and knowledge necessary to create 3D art and animation. Among other things, this course explores digital editing, compositing, motion graphics, studio lighting, camera settings, and rotoscoping. Digital editing software such as Avid, Premiere, AfterEffects, Flash, Toonboom, Nuke, and Soundbooth will be explored. This is a hands-on course, focused on learning-by-doing, and includes a lecture component.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • DGMD 2730 3D Modeling & Rigging

    (2-2-0) 3 Credits UN
    This course introduces basic concepts and techniques of digital sculpting, spatial description, and placement of virtual three-dimensional objects, environments, and scenes. 3D modeling software will be explored, including 3D Max, Maya, and Mudbox. This is a portfolio-building course, focused on learning-by-doing, and includes a lecture component.
    Pre-requisite(s): None Concurrency: DGMD 2700 , DGMD 2710 , DGMD 2720   Co-requisite(s): None
  
  • DGMD 2740 3D Rendering

    (2-2-0) 3 Credits UN
    This course introduces basic concepts and technique to simulate three-dimensional environments, and includes lighting, shading, and texturing. This course provides an overview of color concepts, and a variety of rendering methods, including ray tracing, radiosity, hardwarebased, image-based, and non-photorealistic rendering. Lighting and its effects will be explored. 3D software will be explored, including 3D Max, Maya, AfterEffects, Photoshop, Mari, Vray, and Mental Vray. This is a portfolio-building course, focused on learning-by-doing, and includes a lecture component.
    Pre-requisite(s): None Concurrency: DGMD 2700 , DGMD 2710 , DGMD 2720   Co-requisite(s): None
  
  • DGMD 2750 Animation for 3D Art

    (2-2-0) 3 Credits UN
    This course introduces the principles of animation and the application of visual effects. This course reviews basic concepts of animation, including fundamental techniques such as keyframing and in-betweening, communicating emotion and thought processes, and the use of storyboarding. Advanced animation techniques such as using parameter curves to animate and hybrid environments will be explored. Animation software including 3D Max and Maya will be utilized. This is a portfolio-building course, focused on learning-by-doing, and includes a lecture component.
    Pre-requisite(s): None Concurrency: DGMD 2700 , DGMD 2710 , DGMD 2720  Co-requisite(s): None
  
  • DGMD 2760 Compositing and Output for 3D Art

    (2-2-0) 3 Credits UN
    This course introduces the basic concepts and techniques required to enhance and combine live-action elements, two-dimensional renderings of three-dimensional environments, and combinations of live and computer-generated imagery. Retouching, color grading, image resolution, file formats, and delivery media will be addressed. This is a portfolio-building course, focused on learning-by-doing, and includes a lecture component.
    Pre-requisite(s): None Concurrency: DGMD 2700 , DGMD 2710 , DGMD 2720  Co-requisite(s): None
  
  • DGMD 2770 3D Art Projects & Portfolio

    (2-2-0) 3 Credits UN
    This course explores advanced concepts in designing and producing computer-generated art for the 3D environment. Students begin production of a prototype as part of a group thesis project that demonstrates creativity, the ability to work collaboratively, and the knowledge of sophisticated production techniques.
    Pre-requisite(s): None Concurrency: DGMD 2700 , DGMD 2710 , DGMD 2720 , DGMD 2730 , DGMD 2740 , DGMD 2750 , DGMD 2760   Co-requisite(s): None
  
  • DGMD 2900 Digital Production Studio

    (2-2-0) 3 Credits UN
    This course mirrors the professional graphic art industry workflow model. Students work to define the scope of projects, the range of assets needed to complete them, the technology required to assemble them into executable formats, and the time required to get all the work done. By the end of the course, students develop an intimate knowledge of standard industry project management practices.
    Pre-requisite(s): None Concurrency: DGMD 1100 , DGMD 1120 , DGMD 1130 , DGMD 1140 , DGMD 1150 , DGMD 2300 , DGMD 2350 , DGMD 2500 , DGMD 2510  Co-requisite(s): None
  
  
  • DGMD 2920 Special Projects

    (2-2-0) 3 Credits UN
    The student will perform advanced work in portfolio building according to individual need and specific area of interest. Because the digital media design field is so broad and constantly changing, this course will be reserved for students who would like to complement the Digital Media Design curriculum with relatable topics in the digital arts.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • DPET 1003 Introduction to Diesel Engine Parts: Identification and Operating Principles

    (1-6-0) 3 Credits UN
    This course is an introduction to the design and construction of diesel engines and identification of diesel engine parts.
    Pre-requisite(s): None Concurrency: DPET 1004 , DPET 1309  Co-requisite(s): None
  
  • DPET 1004 Safety Skills and Basic Shop & Mechanical Skills

    (2-4-0) 4 Credits UN
    Basic safety information needed to prepare individuals entering the workforce with an introduction to the occupation of Diesel Powered Equipment Technology, safety, tools, test equipment, fasteners, bearings, and seals. Laboratory work requires using tools and fasteners.
    Pre-requisite(s): None Concurrency: DPET 1003 , DPET 1309   Co-requisite(s): None
  
  • DPET 1103 Basic Hydraulics

    (1-4-0) 3 Credits UN
    This course includes the principles of basic hydraulic systems and general maintenance procedures of a hydraulic system. Also included are the removal, disassembly, inspection, evaluation, repair, and reassembly and installation of hydraulic components.
    Pre-requisite(s): Prerequisite and/or DPET 1003 , DPET 1004 , DPET 1309  Concurrency: None Co-requisite(s): DPET 1106 , DPET 1313  
  
  • DPET 1106 Advanced Diesel Engines & Fuel Systems

    (2-8-0) 6 Credits UN
    This course is an introduction to the design, construction, and identification of engine parts and operation of the diesel engine.
    Pre-requisite(s): DPET 1003 , DPET 1004 , DPET 1309  Concurrency: DPET 1103 , DPET 1313  Co-requisite(s): None
  
  • DPET 1309 Diesel Electrical Systems & Vehicle Electrical Components

    (4-10-0) 9 Credits UN
    This course will include electrical safety courses; tool use; connecting and disconnecting techniques; direct current symbols; components and schematics; principles of DC voltage and current; Ohm’s Law; and the diagnosis, repair, and calibration of electrical/electronic systems.
    Pre-requisite(s): None Concurrency: DPET 1003 , DPET 1004  Co-requisite(s): None
  
  • DPET 1313 Introduction to Diesel Equipment Power Trains

    (1-6-0) 4 Credits UN
    This course includes a detailed study of the function, construction, operation and servicing of automatic and manual transmissions.
    Pre-requisite(s): DPET 1003 , DPET 1004 , DPET 1309   Concurrency: DPET 1103 , DPET 1106  Co-requisite(s): None
  
  • DPET 2003 Truck Brake Systems

    (1-6-0) 4 Credits UN
    The course includes the nomenclature, theory of operation, and service procedure for medium/heavy duty truck braking systems to include air and hydraulics.
    Pre-requisite(s): DPET 1003 , DPET 1004 , DPET 1309   Concurrency: DPET 1103 , DPET 1106 , DPET 1313   Co-requisite(s): None
  
  • DPET 2104 Diesel Truck Steering Systems & Suspension

    (2-4-0) 4 Credits UN
    The course includes the theory of operation and service procedures for medium/heavy duty truck steering and suspension systems.
    Pre-requisite(s): DPET 1003 , DPET 1004 , DPET 1309  C or Better in LFEN 83  or LFEN 93  or 18 better on ACT or Compass English 68+, or SAT English 430 + C or better in LFMA 83  or LFEN 93  or ACT score of 19 or better, or Compass Pre-Algebra score of 64+, or Compass Algebra score of 40+, or SAT Math score of 450+ Successfully completed or has an approved exemption of CCFS 1003 with a “C” or better Concurrency: DPET 2204 , DPET 2304  Co-requisite(s): None
  
  • DPET 2204 Diesel Equipment Air Conditioning

    (2-4-0) 4 Credits UN
    This course covers the physical and chemical laws governing the principles of refrigeration. The basic cycle and components will be covered. Applications will include alternate refrigerants, transferring, evacuation and system reprocessing.
    Pre-requisite(s): DPET 1003 , DPET 1004 , DPET 1309  C or Better in LFEN 83  or LFEN 93  or 18 better on ACT or Compass English 68+, or SAT English 430 + C or better in LFMA 83  or LFEN 93  or ACT score of 19 or better, or Compass Pre-Algebra score of 64+, or Compass Algebra score of 40+, or SAT Math score of 450+ Successfully completed or has an approved exemption of CCFS 1003 with a “C” or better Concurrency: DPET 2104 , DPET 2304   Co-requisite(s): None
  
  • DPET 2304 Diesel Preventive Maintenance

    (1-6-0) 4 Credits UN
    This course includes the importance of preventive maintenance, types of preventive maintenance, types of preventive maintenance inspection, vehicle overview, and the knowledge and use of specialty tools.
    Pre-requisite(s): DPET 1003 , DPET 1004 , DPET 1309  C or Better in LFEN 83  or LFEN 93  or 18 better on ACT or Compass English 68+, or SAT English 430 + C or better in LFMA 83  or LFEN 93  or ACT score of 19 or better, or Compass Pre-Algebra score of 64+, or Compass Algebra score of 40+, or SAT Math score of 450+ Successfully completed or has an approved exemption of CCFS 1003 with a “C” or better Concurrency: DPET 2104 , DPET 2204   Co-requisite(s): None
  
  • DRFT 1106 Fundamentals of Manual Drafting

    (2-8-0) 6 Credits UN
    This course covers fundamental drafting procedures and techniques used in manual drafting. This course covers orientation to the drafting profession, sketching techniques, drafting instruments, equipment, lettering techniques, geometric construction, orthographic projection, dimensioning practices and multi-view drawings.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • DRFT 1206 Computer-Aided Design I

    (2-8-0) 6 Credits UN
    This course covers basic and intermediate concepts, drafting procedures and techniques used in two-dimensional CAD drafting. It introduces the student to the applications, operation and use of basic and intermediate two-dimensional CAD commands, terminology, command utilization and components of a CAD workstation. Also covered in this course is isometrics, orthographic and multi-view drawings as well as dimensioning procedures and techniques.
    Pre-requisite(s): None Concurrency: DRFT 1106   Co-requisite(s): None
  
  • DRFT 1306 Computer-Aided Design II

    (2-8-0) 6 Credits UN
    This course covers advanced concepts and techniques used in two-dimensional CAD drafting by the application of advanced commands and terminology. Also covered with advanced 2D CAD commands are primary auxiliary views, the development of intersections of geometric surfaces, flat patterns of geometric shapes and various types of fasteners and threads.
    Pre-requisite(s): DRFT 1206   Concurrency: None Co-requisite(s): None
  
  • DRFT 1406 Computer-Aided Design III

    (2-8-0) 6 Credits UN
    This course covers basic and intermediate concepts, principles and techniques used in threedimensional CAD drafting by the application of 3D commands and terminology. This course will cover three-dimensional models created from surface and solid entities.
    Pre-requisite(s): None Concurrency: DRFT 1306  Co-requisite(s): None
  
  • DRFT 2001 Capstone in Drafting and Design Technology

    (1-0-0) 1 Credits UN
    This Capstone course is designed to demonstrate accumulated knowledge, training, and skills in drafting and also to show job readiness for the work force.
    Pre-requisite(s): DRFT 1406   , Eligibility ENGL 1010 and MATH 1105 Concurrency: None Co-requisite(s): None
  
  • DRFT 2106 Computer-Aided Design IV

    (2-8-0) 6 Credits UN
    This course covers advanced concepts, principles and techniques used in three-dimensional CAD drafting by the application of the latest advanced 3D software.
    Pre-requisite(s): DRFT 1406   Concurrency: None Co-requisite(s): None
  
  • DRFT 2203 Advanced Discipline-Industrial Drafting

    (1-7-0) 3 Credits UN
    Using computer-aided design, this course covers piping techniques, methods, terms and conventions, and the various types of drawings used in pipe drafting.
    Pre-requisite(s): DRFT 1406   Concurrency: None Co-requisite(s): None
  
  • DRFT 2303 Advanced Discipline-Architectural Drafting

    (1-7-0) 3 Credits UN
    Using computer-aided design, this course covers architectural techniques, methods, terms and conventions, and the various types of drawings used in architectural drafting.
    Pre-requisite(s): DRFT 1406 ; LFMA 83 , LFEN 83  or eligibility for MATH 1105 , ENGL 1010   Concurrency: None Co-requisite(s): None
  
  • DRFT 2403 Advanced Discipline-Civil/Structural Drafting

    (1-7-0) 3 Credits UN
    Using computer-aided design, this course covers civil/structural techniques, methods, terms and conventions, and the various types of drawings used in civil/structural drafting.
    Pre-requisite(s): DRFT 1406 ; LFMA 83 , LFEN 83  or eligibility for MATH 1105 , ENGL 1010   Concurrency: None Co-requisite(s): None
  
  • ECON 2010 Survey of Economics Principles

    (3-0-0) 3 Credits UT
    General introduction to basic micro and macro-economic principles. Topics include monetary policy, fiscal policy, public finance, international trade, economic growth, price determination, and market structure. Not open to students with earned credit for ECON 2020  or ECON 2030 . Equivalent to CECN 2113, Economic Principles, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • ECON 2020 Principles of Macroeconomics

    (3-0-0) 3 Credits UT
    ECON 2020 covers the theory of the national and government economic system, concepts, institutions and policies, including monetary theory and banking, national income theory, problems of inflation and unemployment and population, and international trade and financing. ECON 2020 is summarized as an introduction to economy-wide phenomena, including national income, inflation, unemployment, economic growth, the monetary system, fiscal policy, international trade and finance. Equivalent to CECN 2213, Macroeconomics, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • ECON 2030 Principles of Microeconomics

    (3-0-0) 3 Credits UT
    Introduction to how individuals and firms make decisions and how they interact. Topics include the study of consumer theory, theories of price determination, production, market structure, trade, externalities, and public goods. Equivalent to CECN 2223, Microeconomics, Louisiana Board of Regents Common Course Matrix.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • ECPT 1000 Process Safety and Monitoring

    (2-2-0) 3 Credits UT
    This course is a lecture and lab to provide a comprehensive introduction to safety system within a process plant and monitoring of its operations. It will include an introduction to the methods and technologies used by process operators to monitor the operation of systems within industry. Functioning monitoring methods, data collection, and response decisional frameworks will be introduced.
    Pre-requisite(s): None Concurrency: None Co-requisite(s): None
  
  • ECPT 1500 Industry Science and Process Chemistry

    (2-2-0) 3 Credits UT
    This course is a lecture and lab that details to the student the culture and operational strategies employed at chemical, organic material and energy production plants and introduce the student to the basic chemical reactions that govern the processing of chemicals into valuable products (such as alternative fuels), their potential waste streams and/or safe by-products.
    Pre-requisite(s): DRFT 1406 ; LFMA 83 , LFEN 83  or eligibility for MATH 1105 , ENGL 1010   Concurrency: ECPT 1000   Co-requisite(s): None
  
  • ECPT 1800 Introduction to Process Technology I

    (2-2-0) 3 Credits UT
    This is a Lecture and lab course that introduces the student to the various processing technologies that convert feed stock into chemicals and fuels or degrade pollutants into safe products that can be released into the environment. Students will be provided with a basic understanding of the key process components and how they are integrated into a complete operating system, as well as collection, handling and processing of samples used to monitor the smooth operations of production facilities. They will learn about key process components and sampling techniques. The topics covered include chemical production, alternative energy production, waste management and environmental processes.
    Pre-requisite(s): ECPT 1000   Concurrency: MATH 1105   Co-requisite(s): None
  
  • ECPT 2000 Introduction to Process Technology II

    (2-2-0) 3 Credits UT
    This is a Lecture and lab course that is the second educational component of teaching the students the basic industrial activities used to produce energy and products. They will be introduced to the basic chemistry, physics, environmental science associated with industrial processes including process drawings and equipment. The student will be introduced to the fate and transport of chemicals as they are released into the ecosystem along with an overview of methods to treat these chemicals to convert them into ecologically safe chemicals.
    Pre-requisite(s): ECPT 1800   Concurrency: None Co-requisite(s): None
  
  • ECPT 2100 Introduction to Alternative Energy Production I

    (2-2-0) 3 Credits UT
    This is a lecture and lab course that introduces students to the issues, processes and technologies of the power and fuel industries with special emphasis on alternative energy. Both production methods and associated business aspects of several example processes are explored. The course also involves hands-on observations of operating production systems.
    Pre-requisite(s): ECPT 1000   Concurrency: MATH 1105   Co-requisite(s): None
 

Page: 1 | 2 | 3 | 4 | 5 | 6